Hi all,
I really need help from someone on this forum... I explain my problem bellow:
For the first time i boot this server after install i run the Anywhere and VPN Wizard and it worked. Then i have rebotted and shutdown the server a few times during some days. Now the Anywhere Access and VPN dot work.
Now i have already try everything i know to try to get it fixed but still the Anywhere Access and VPN give me the error of "Server is Blocked Port 80/443" and also "There must be more than one router on my network".
I checked everything on my network and all seems to be ok.
Can someone please give me a advice on how to fix this?
Also is some experience user is in the mood and available to help me i could give remote access like using Temviewer or Logmein and you could login my server to see if you can identify the problem. I will be online for the next hours / days and i would
really apreciate that.
I leave bellow a resume of my setup. If to help me you need any further information feel free to ask.
Important Note 1: DNS is running on the server and DHCP is running on the router.
Important Note 2: Im using a free xx.remotewebaccess.com microsoft domain.
Hardware:
ISP Router - Thas is in bridge mode - IP: 192.168.1.1
My Own Router - TP-Link TL-ER5120 - IP: 192.168.0.1
My Server - HP Microserver N40L - IP: 192.168.0.10
On the router:
a) UPnP is disable.
b) Already open the port 80 and 443 and redirect them to my server IP.
c) On the DHCP menu i have add the server IP as primary DNS and the Router IP as Secondary DNS.
On the server:
a) Windows Server 2012 R2 is installed with all the updates
b) Manually checked on the server by using the port open free test tool www.canyouseeme.org and it confirm that both port 80 and 443 are open.
c) Already try to run the Anywhere repair and also to setup it again. Always gives the errors of "Server is blocked port 80/443" and "There must be more than one router on my network"
-----
Thanks